TE0720-03-2IF

372,40 €(včetně DPH 21%)
-+

Overview

The Trenz Electronic TE0720-03-2IF is an industrial-grade FPGA module integrating a Xilinx Zynq 7020 SoC, a gigabit Ethernet transceiver (physical layer), 8 Gbit (1 Gbyte) DDR3 SDRAM with 32-bit width, 32 Mbyte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/Os is provided via rugged high-speed stacking strips.

All modules in 5 x 4 cm form factor are fully mechanically and largely electrically compatible among them. All this on a tiny footprint, smaller than a credit card, at the most competitive price.

Free and open reference designs are available for download at GitHUb, our open design repository.

Key Features

  • Xilinx Zynq XC7Z020-2CLG484I
  • Rugged for high shock and vibration
  • ARM dual-core Cortex-A9 MPCore
  • 10/100/1000 tri-speed Gigabit Ethernet transceiver (PHY), SGMII accessible on a board-to-board connector
  • USB 2.0 high speed ULPI transceiver
  • 32-bit-wide 1 Gbyte DDR3 SDRAM
  • 32 MByte SPI Flash memory (for configuration and operation)
  • 4 Gbyte e-NAND (up to 32 GByte)
  • Plug-on module with 2 × 100-pin and 1 x 60-pin high-speed hermaphroditic strips
  • 152 FPGA I/Os (75 LVDS pairs possible) and 14 MIOs available on board-to-board connectors
  • 4.0 A x 1.0 V power rail
  • 1.5 A x 1.5 V power rail
  • 1.5 A x 1.8 V power rail
  • System management and power sequencing
  • eFUSE bit-stream encryption
  • AES bit-stream encryption
  • Valid MAC Address and 2K serial EEPROM
  • SHA-256 authentication chip with unique serial number
  • RTC, temperature compensated
  • 3 user LED
  • Evenly-spread supply pins for good signal integrity

Other assembly options for cost or performance optimization available on request. High volume prices on request.

Depending on the customer design, additional cooling might be required.

Required Software

The Xilinx Vivado Design Suite is a revolutionary IP and System Centric design environment built from the ground up to accelerate the design for all programmable devices. Vivado supports the following devices families: Ultrascale, Virtex-7, Kintex-7, Artix-7, and Zynq -7000.

Vivado Design Suite

Additional Informations

- Manufacturer's product name: TE0720-03-2IF
Product Page - Overview of our TE0720 Series
Trenz Electronic TE0720 Wiki
Documentation Archive & Download Area