TE0715-03-30-1C

359,00 €(včetně DPH 21%)
-+

Overview

The Trenz Electronic TE0715-03-30-1C is a FPGA module integrating a Xilinx Zynq Z-7030 with 4 MGT Links, a Gigabit Ethernet transceiver (physical layer), 1 GByte DDR3 SDRAM with 32-bit width, 32 MByte SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

All modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among them. All this on a tiny footprint, smaller than a credit card, at the most competitive price.

Key Features

  • Xilinx Zynq 7030 XC7Z030-1SBG485C
  • Rugged for shock and high vibration
  • ARM dual-core Cortex-A9 MPCore
  • 10/100/1000 tri-speed gigabit Ethernet transceiver (PHY) with SGMII
  • MAC Address EEPROM
  • USB 2.0 high-speed ULPI transceiver
  • 32-bit-wide 1 GByte DDR3 SDRAM
  • 32 MByte QSPI Flash memory (with XiP support)
  • Programmable Clock Generator: Transceiver Clock (default 125 MHz)
  • Plug-on module with 2 x 100-pin and 1 x 60-pin high-speed hermaphroditic strips
  • 132 FPGA I/O's (65 LVDS pairs possible) and 14 PS-MIO available on board-to-board connectors
  • 4 GTP/GTX Tranceivers
  • On-board high-efficiency DC-DC converters: 4.0 A x 1.0 V power rail; 1.5 A x 1.5 V power rail; 1.5 A x 1.8 V power rail
  • Temperature compensated RTC (real-time clock)
  • System management
  • eFUSE bit-stream encryption
  • AES bit-stream encryption
  • User LED
  • Evenly-spread supply pins for good signal integrity

Other assembly options for cost or performance optimization available on request.

Embedded Development Suite

A hardware development platform is available.

Latest documentation, design support files and reference designs with source files are available for download free of charge.

Required Software

The Xilinx Vivado Design Suite is a revolutionary IP and System Centric design environment built from the ground up to accelerate the design for all programmable devices. Vivado supports the following devices families: Ultrascale, Virtex-7, Kintex-7, Artix-7, and Zynq -7000.

Vivado Design Suite

Additional Informations

- Manufacturer's product name: TE0715-03-30-1C
Product Page - Overview of our TE0715 Series
Trenz Electronic TE0715 Wiki
Documentation Archive & Download Area