TE0703-03
Overview
The Trenz Electronic TE0703-03 carrier board provides low-cost connection and extension to the Trenz Electronic TE0720 Zynq SoC micromodules.
Features
- Carrier Controller CPLD (Lattice LCMXO2-1200HC)
- 2 x VG96 Connectors (Mounting Holes and Solder Pads)
- SDIO Port Expander with Voltage-Level Translation
- Micro SD Card Connector - Zynq SDIO0 Bootable SD port
- 4 x User LEDs
- D1 and D2 are connected to the Carrier Controller, their function depends on the Firmware
- D3 and D4 are connected to the 4x5 Module B2B Connector pins, and are directly controlled by the module
- Mini USB Connector (USB JTAG and UART Interface)
- 1 x User Push Button
- Connected to "intelligent Carrier Controller (iCC)" and can be used as module reset button. Other usage possible, actual function depend on the code loaded into iCC.
- RJ45 GbE Connector
- USB Host Connector
- Barrel jack for 5V* Power Supply
- 4A High-Efficiency Power SoC DC-DC Step-Down Converter with Integrated Inductor (Enpirion EN6347) for 3.3V Power Supply
- Trenz 4x5 Module Socket (3x Samtec LSHM Series Connectors)
- USB JTAG and UART Interface (FTDI FT2232H), compatible with Xilinx Tools (also with many other tools)
- 4 User DIP Switches
- Enable/disable update of the "intelligent Carrier Controller"
- MIO0 (readable signal by iCC and Module)
- 2 "Mode" bits
Package Content
- 1 x TE0703-03 Carrier Board
Required Hardware
- TE0720 Zynq module
- 5 V Power Supply with 2.1 x 5.5 mm barrel Connector with minimum 2 A
- Such as Switching Power Supply 5 VDC
References
- Manufacturer name: Trenz Electronic
- Manufacturer's part name: TE0703-03 Carrier Board
- Manufacturer's part code(s): TE0703-03