GigaBee XC6SLX45-2 Industrial Temp. Range with 2 x 128 MByte
GigaBee XC6SLX45-2 Industrial Temperature Range (Revision 02) with 2 x 128 MByte
GigaBee XC6SLX series are industrial FPGA micromodules integrating a leading-edge Xilinx Spartan-6 LX FPGA, two independent banks of 16-bit-wide 128 MBytes DDR3 SDRAM (optional 2 x 512 MByte DDR3 SDRAM in 2 banks), 16 MBytes SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/Os is provided via robust board-to-board (B2B) connectors.
All this on a tiny footprint, smaller than a credit card, at the most competitive price. Hardware and software development environment as well as reference designs are available at: www.trenz-electronic.de.
Sample Applications
- Cryptographic hardware module
- Digital signal processing
- Embedded educational platform
- Embedded industrial OEM platform
- Embedded system design
- Emulation platforms
- FPGA graphics
- Image processing
- IP (intellectual property) cores
- Low-power design
- Parallel processing
- Rapid prototyping
- Reconfigurable computing
- System-on-Chip (SoC) development
Key Features
- High performance Xilinx Spartan-6 LX FPGA, depending on model: LX45, LX100 or LX150
- FPGA Design Security Solution
- 2 independent 16-bit-wide 1 GBit (128 MByte) DDR3 SDRAM
(optional: 2 independent 4 GBit (512 MByte) DDR3 SDRAM in 2 banks) - 128 MBit (16 MByte) SPI Flash memory (for configuration and operation)
- JTAG port (SPI indirect)
- FPGA configuration through:
- B2B connector
- JTAG port
- SPI Flash memory
- Plug-on module with 2 × 100-pin high-speed hermaphroditic strips
- Up to 52 differential, up to 109 single-ended (+ 1 dual-purpose) FPGA I/O pins available on B2B strips
- High-efficiency DC-DC switching regulators
- 100 MHz Oscillator
- eFUSE bit-stream encryption (LX100 or larger)
- 1 user LED
- Evenly-spread supply pins for good signal integrity
- Other assembly options for cost or performance optimization available upon request.
Specifications
- Xilinx Spartan-6 LX FPGA (See model overview below)
- 128 MBit (16 MByte) serial Flash memory with dual/quad SPI interface
- 48-bit node address chip Maxim Integrated Products DS2502-E48 (contains valid MAC adress)
- 1 KBit Protected 1-Wire EEPROM with SHA-1 Engine Maxim Embedded Security Products DS2432
- 2 x fine-pitch (0.5 mm) 100-pin high-speed (up to 10.0 GHz / 20 Gbps) hermaphroditic strips LSHM-150-04.0-L-DV-A-S-K-TR
- Up to 52 differential FPGA input/output pins available on B2B strips
- Up to 109 single-ended (+ 1 dual-purpose) FPGA input/output pins available on B2B strips
- JTAG and SPI pins available on B2B strips
- 4.0 A high-efficiency DC-DC switching regulator for power rail 1.2 V
- 1.5 A high-efficiency DC-DC switching regulator for power rail 1.5 V
- 2 x 800 mA DC-DC linear regulator for power rails 2.5 V and VCCAUX
- Processor supervisory circuits with power-fail and watchdog Texas Instruments TPS3705-33
- 100 MHz clock signal (system + user)
- Power supply voltage: 3.3 V
- Dimensions: 50 mm × 40 mm (20 cm²)
- Stacking hight: 8 mm
- Maximum height on carrier board surface: 12 mm (standard connectors)
- Weight: 17.2 ± 0.1 g
Recommended Hardware
- GigaBee XC6SLX carrier board with external power supply
- JTAG Programming Cable
Recommended Software
- Trenz Electronic GigaBee XC6SLX45: Xilinx ISE WebPACK (free license)
Most of Trenz Electronic reference designs, need one of the following Xilinx software licenses:
- Xilinx WebPACK + EDK (Embedded Development Kit) stand-alone (GigaBee XC6SLX45 only)
- Xilinx ISE Design Suite - Embedded Edition
- Xilinx ISE Design Suite - System Edition
You can find all Xilinx ISE versions here.
References
- Manufacturer name: Trenz Electronic GmbH
- Manufacturer part name: GigaBee XC6SLX45-2FGG484I
- Manufacturer part code: TE0600-02IN
Resources
- Manufacturer product page
- Documentation archive
- Revision 01 changes to Revision 02, please read the product change notification here.
- Example projects