TE0712-01-200-2C3

286,80 €(včetně DPH 21%)
-+

Overview

This module is identically constructed to the TE0712-01-200-2C, except there are 2.5mm Samtec connectors plugged instead of 4mm.

The Trenz Electronic TE0712-01-200-2C3 is a FPGA module integrating a Xilinx Artix-7 200T FPGA, 32 Mbyte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/Os is provided via rugged high-speed stacking strips. All modules in 4 x 5 cm form factor are mechanically compatible.

All this on a tiny footprint, smaller than a credit card, at the most competitive price.

Embedded Development Suite

A hardware development platform is available.

Latest documentation, design support files and reference designs with source files are available for download free of charge.

Key Features

  • Xilinx Artix-7 XC7A200T-2FBG484C
  • 256 Mbit (32 Mbyte) Quad-SPI Flash memory (for configuration and operation)
  • 4 MGTs (multi gigabit transceivers)
  • 1 GByte DDR 3 Memory
  • 100 Mbit Ethernet Phy in RMII Mode
  • Programmable Low Jitter PLL (Silicon Labs Si5338)
  • On-board high-efficiency DC-DC converters
    - Core voltage regulator: 10 A
    - Supply voltages: either 3.3 V or 3.3 V and 5 V
  • Plug-on module with two 100-pin and one 60-pin high-speed hermaphroditic stacking strips
  • Up to 154 (75 differential pairs + 4 single-ended) single-ended FPGA I/O pins available on B2B strips
  • 2 user LEDs (through system controller)
  • Only 5 x 4 cm!
  • AES bit-stream encryption
  • Evenly spread supply pins for good signal integrity

Other assembly options for cost or performance optimization available on request.

Required Software

The Xilinx Vivado Design Suite is a revolutionary IP and System Centric design environment built from the ground up to accelerate the design for all programmable devices. Vivado supports the following devices families: Ultrascale, Virtex-7, Kintex-7, Artix-7, and Zynq -7000.

Vivado Design Suite

Package Content

1x TE0712-01-200-2C3 (as shown, without spacer bolts and screws)

Additional Informations

- Manufacturer's product name: TE0712-01-200-2C3
Product Page - Overview of our TE0712 Series
Trenz Electronic TE0712 Wiki
Documentation Archive & Download Area