TE0712-01-200-2C

249,00 €(včetně DPH 21%)
-+

Overview

Trenz Electronic TE0712 is an industrial-grade FPGA module integrating a Xilinx Artix-7 FPGA, 32 Mbyte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/Os is provided via rugged high-speed stacking strips.

 

Latest documentation, design support files, reference design source files and tools are available for download free of charge.

Key Features

  • Industrial-grade Xilinx Artix-7 FPGA module (100T*, 200T*) 
    * Device supported by the free Xilinx Vivado WebPACK tool.
  • 256 Mbit (32 Mbyte) Quad-SPI Flash memory (for configuration and operation)
  •  4 MGTs (multi gigabit transceivers)
  • 1 GByte DDR 3 Memory
  • 100 Mbit Ethernet Phy in RMII Mode 
  • Programmable Low Jitter PLL (Silicon Labs Si5338)
  • On-board high-efficiency DC-DC converters
    • Core voltage regulator: 10 A 
    • Supply voltages: either 3.3 V or 3.3 V and 5 V
  • Plug-on module with two 100-pin and one 60-pin high-speed hermaphroditic stacking strips
  • Up to 154 (75 differential pairs + 4 single-ended) single-ended FPGA I/O pins available on B2B strips
  • 2 user LEDs (through system controller)
  • Only 5 x 4 cm!
  • AES bit-stream encryption
  • Evenly spread supply pins for good signal integrity
  • Assembly options for cost or performance optimization available on request

Recommended Software

  • Xilinx Vivado Webpack (free license)

You can find all Xilinx Vivado versions here.

References

  • Manufacturer name: Trenz Electronic GmbH
  • Manufacturer part name: Micromodule Artix-7 XC7A200T-2C
  • Manufacturer part code: TE0712-01-200-2C

Resources