TE0710-02-100-2CF

190,90 €(včetně DPH 21%)
-+

Overview

The Trenz Electronic TE0710-02-100-2CF is a FPGA module integrating a Xilinx Artix-7 100T FPGA, two megabit Ethernet transceivers, 512 megabyte DDR3 SDRAM with 8-bit width, 32 megabyte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/Os is provided via rugged high-speed stacking strips. All modules in 4 x 5 cm form factor are mechanically compatible.

All this on a tiny footprint, smaller than a credit card, at the most competitive price.

Embedded Development Suite

A hardware development platform is available.

Latest documentation, design support files and reference designs with source files are available for download free of charge.

Key Features

  • Xilinx Artix-7 XC7A100T-2CSG324C
  • 256 MBit (32 MByte) Quad-SPI Flash memory (for configuration and operation)
  • 512 MByte DDR 3 Memory
  • Dual 100 MBit Ethernet Phy
  • On-board high-efficiency DC-DC converters
    - Core voltage regulator: 4 A
    - Supply voltages: either 3.3 V or 3.3 V and 5 V
  • Plug-on module with two 100-pin and one 60-pin high-speed hermaphroditic stacking strips
  • Up to 112 (51 differential pairs + 10 single-ended) single-ended FPGA I/O pins available on B2B strips
  • User LED
  • Only 5 x 4 cm!
  • AES bit-stream encryption
  • Evenly spread supply pins for good signal integrity

Other assembly options for cost or performance optimization available on request.

Required Software

The Xilinx Vivado Design Suite is a revolutionary IP and System Centric design environment built from the ground up to accelerate the design for all programmable devices. Vivado supports the following devices families: Ultrascale, Virtex-7, Kintex-7, Artix-7, and Zynq -7000.

Vivado Design Suite

Additional Informations

- Manufacturer's product name: TE0710-02-100-2CF
Product Page - Overview of our TE0710 Series
Trenz Electronic TE0710 Wiki
Documentation Archive & Download Area