Overview

TE0715s are industrial-grade SoC modules integrating a Xilinx Zynq-7000 SoM with 4 MGT Links, a gigabit Ethernet transceiver, 1 gigabyte DDR3 SDRAM with 32-bit width, 32 megabyte Flash memory for configuration and operation, 4 transceivers, a USB ULPI transceiver, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/Os is provided via rugged high-speed stacking strips. All modules in 4 x 5 cm form factor are mechanically compatible.

All this on a tiny footprint, smaller than a credit card, at the most competitive price.

Key Features

 Xilinx Zynq-7000 (Z-7015, Z-7030) SoM (system on module), supported by the free Xilinx Vivado WebPACK tool

• Rugged for shock and high vibration
• 2x ARM Cortex-A9
• 10/100/1000 tri-speed gigabit Ethernet transceiver (PHY) with SGMII
  - MAC Address EEPROM
• 32-Bit-wide 1 GByte DDR3 SDRAM
• 32 MByte QSPI Flash memory (with XiP support)
• Programmable Clock Generator
  - Transceiver Clock (default 125 MHz)
• Plug-on module with 2× 100-pin and 1× 60-pin high-speed hermaphroditic strips
• 132 FPGA I/Os (65 LVDS pairs possible) and 14 PS-MIO available on board-to-board connectors
• 4 GTP/GTX (high-performance transceiver) lanes
  - GTP/GTX (high-performance transceiver) clock input
• USB 2.0 high-speed ULPI transceiver
• On-board high-efficiency DC-DC converters 
  • 4.0 A x 1.0 V power rail
  • 1.5 A x 1.5 V power rail
  • 1.5 A x 1.8 V power rail  
• System management
• eFUSE bit-stream encryption
• AES bit-stream encryption
• Temperature compensated RTC (real-time clock)
• User LED
• Evenly-spread supply pins for good signal integrity 

Assembly options for cost or performance optimization available upon request.

Embedded Development Suite

A hardware development platform is available.

Latest documentation, design support files, reference design with source files and tools are available for download free of charge.

Model Overview

*1) low profile - this module is identically constructed to the TE0715-02-15-1I, except there are 2.5mm Samtec connectors installed instead of 4mm.